|
|
| |
|
|
Steel Apparent Consumption in EU to Recover in 2020 – EUROFER-The 21st China(Guangzhou)Int'l Stainless Steel Industry Exhibition
3/2/2020 - Stainless Steel Exhibition |
--------------------------------------------------------------------------------------------------------------- |
|
European Steel Association EUROFER has released “Economic and Steel Market Outlook - Quarter 1, 2020” report with steel data up until quarter 3, 2019. EUROFER Director General Mr Axel Eggert said “2019 was another challenging year for the steel sector, with declines in steel consumption and import levels which, while down compared to 2018, were still very high compared to historical levels. While some growth is expected to return to steel markets in 2020, even these modest estimations could be upended if events take an unexpected turn”.
EU28 apparent steel consumption fell by 3.1% year-on-year in the third quarter of 2019 and amounted to 37.2 million tonnes. The stock cycle continued to be negative, which further impacted on the negative trend in final steel use. In fact, ongoing uncertainty about near-term business conditions as well as relatively high stock levels at the end of the first quarter of 2019 had triggered a steeper-than-expected stock reduction in the second quarter, contrary to the seasonal pattern, which has continued, albeit to a lower extent, in the third quarter.
The current downturn in steel demand led to a fall of 4% year-on-year in domestic deliveries in the EU in the third quarter of 2019, following a decrease of 3% in the first quarter. After the exceptional drop of 19% year-on-year experienced in the second quarter, third country imports decreased only marginally in the third quarter (by 1%), and amounted to 8.8 million tonnes, accounting for 23.8% of EU steel demand. Monthly data continued to show high volatility.
As in previous quarters, developments in total imports conceal distortions at the individual product level, which are, in essence, reflecting the flaws of the current safeguard mechanism, and which have resulted in a rush to maximise quarterly quota allowances by several key exporters to the EU such as Turkey and China.
During the third quarter of 2019, the challenges that the EU sector has had to face have become even more severe, with negative repercussions on market conditions. After recording falls over the first two quarters of 2019, the negative trend in real steel consumption accelerated and early indications for the final quarter of 2019 signal a further year-on-year reduction, resulting in a total decrease in real steel consumption by 1.1% over the whole year 2019. Real consumption levels are expected to recover in the second half of 2020 but also to stabilise around low levels in historical terms. The expected fall in apparent steel consumption in 2019 of 3.3% year-on-year and persisting import pressure is, in essence, expected to mostly have penalised EU steel producers in their business performance.
Market conditions are expected to improve slightly from the third quarter of 2020, although risks related to import distortions and continued global overcapacity are likely to continue undermining the stability of the EU steel market. In particular, global steel capacity has continued to increase and the gap between capacity and production has been widening in recent months.
Apparent consumption is expected to recover in 2020 with a growth rate of 1.2%, basically as a result of a modest re-stocking rather than as a result of a rebound in demand from steel-using sectors.
Business conditions in the manufacturing industry have continued to deteriorate since the peak of the previous cycle, around the end of 2017. This downward trend has become steeper in the second quarter of 2019, particularly in the automotive industry, and has also continued in the third quarter, albeit to a slightly lower extent. The construction sector has continued to record growth in output and has outperformed other steel-using sectors. As a result, output growth in the steel-using sectors has been slowing down since the first quarter of 2018, culminating in a year-on-year fall of 0.4% in the second quarter of 2019, followed by a meagre recovery of 0.2% year-on-year in the third quarter.
The downturn in industrial activity does not only affect Europe, but also is manifested at the global level, reflecting growing trade frictions and uncertainty – which has increasingly hampered business investment. Although a substantial rebound is not in sight in the short-term, some recovery in EU steel-using sectors is expected over the course of 2020.
External risks are likely to continue to cast a shadow over the coming quarters. Global trade tensions have eased thanks to the US-China agreement that has been signed on 15 January, thus avoiding a negative spiral of retaliation further to the US Administration’s new tariffs on goods imported from its main trading partners. However, the EU’s manufacturing sector is still undergoing a serious downturn, given its large exposure to global trade. A no-deal Brexit by the end of 2020 – which is theoretically still possible - and a new escalation in protectionist trade measures, coupled with possible geopolitical tensions in the Middle East (Iran, Iraq, Libya) would further contribute to curbing business confidence and activity in steel-using industries.
Output in the EU’s steel-using sectors is forecast to remain unchanged in 2019 and to grow and by 0.6% in 2020 and 1.4% in 2021.
不銹鋼展-2020第二十一屆廣州國(guó)際不銹鋼工業(yè)展-效果最好的不銹鋼展會(huì)-The 21st China(Guangzhou)Int''l Stainless Steel Industry Exhibition
- Stainless Steel exhibition,2020 Stainless Steel exhibition, China Stainless Steel exhibition, Guangzhou Stainless Steel expo,Guangzhou Stainless Steel exhibition, 2020 Stainless Steel expo, China Stainless Steel expo
|
|
|
|
|
