|
|
| |
|
|
Otto Fuchs orders Aluminium Multi Chamber Melting Furnace from Hertwich Engineering-- The 21st China (Guangzhou) Int’l Plate metal, Bar, wire, Metal Processing &Setting Equipment Exhibition
12/5/2019 金屬板材展-棒材-線材展 -plate metal expo-wire expo |
--------------------------------------------------------------------------------------------------------------- |
|
Otto Fuchs KG is supplementing its casthouse in Meinerzhagen with one Ecomelt-PS150 melting furnace and two tilting holding and casting furnaces from SMS Group’s Hertwich Engineering. The new recycling furnace will be the fifth Ecomelt furnace and with a capacity of 7.7 tonnes per hour.. Both casting furnaces, which are also part of the scope of supply, are designed for a capacity of 20 tonnes.
The Ecomelt-PS150 furnace currently on order with a melting capacity of 7,7 tonnes per hour is the largest multi chamber melting furnace installed at Otto Fuchs to date. It combines scrap preheating and submersion melting of decoated scrap in one compact unit. The entire furnace process is fully automated by a measurement and control system. Scrap is top charged into the vertical arranged preheat shaft and preheated to a maximum temperature of 500°C. Within this temperature range, partial melting is ruled out. Combustion gases are ducted from the main chamber to the melting chamber and the preheat shaft. At the bottom end of the preheating shaft, the preheated material directly immerses into the flowing melt bath of the melting chamber. An electromagnetic liquid metal pump ensures the proper melt flow between the furnace chambers and the flooding of the shaft floor.
Two single chamber furnaces, which are part of this order as well, are placed between the melting furnace and the casting unit. Molten metal is transferred from the Ecomelt melting furnace in one of these furnaces for possible re-alloying. Finally, melt is transferred via the casting launder to the casting machine as needed. Both of these furnaces are hydraulically tiltable. This arrangement ensures a continuous casting operation and reduces downtime for alloy change.
Otto Fuchs KG supplies forgings, extrusion products and rolled rings made of aluminium or other metals and forged car wheels ready for mounting. The high load on these components as well as the extraordinary safety requirements already require precise control of all production steps for the semi-finished products. Hence, Otto Fuchs consistently relies on its own extrusion billet production to ensure product quality.
金屬板材展-線材展-金屬加工展-2020第二十一屆廣州國際金屬板材、棒材、線材及金屬加工設備展—全球三大金屬展之一巨浪展覽
-- The 21st China (Guangzhou) Int’l Plate
metal, Bar, wire, Metal Processing &Setting Equipment Exhibition
Plate metal exhibition, Plate metal expo,2020
Plate metal exhibition,2020 Plate metal expo, Bar exhibition, Bar expo,2020 Bar
exhibition,2020 Bar expo, China Bar exhibition, China Bar expo, wire
exhibition, wire expo,2020 wire exhibition,2020 wire expo, Metal Processing
exhibition, Metal Processing expo,2020 Metal Processing exhibition,2020 Metal
Processing expo, China Metal Processing exhibition, China Metal Processing
expo.
|
|
|
|
|
